-
Carbon Sulfur Analyzer
-
Spectrometer Machine
-
Sand Strength Testing Machine
-
Green Sand Testing Equipment
-
Coated Sand Performance Tester
-
Sand Air Permeability Tester
-
Gas Evolution Tester
-
Surface Tester
-
Sand Rammer
-
Sand Mixer
-
Sand Washing Machine
-
Sand Sieving Machine
-
Methylene Blue Absorption Tester
-
Shatter Index Tester
-
Sand Testing Equipments
Lab Grade Analysis In Field Conditions With Portable Spectrometer Lightweight And Compact Design
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
x| Weight | 25 Kg | Operating Temperature | 10-35°C |
|---|---|---|---|
| Power Requirements | 100-240 V, 50/60 Hz | Dimensions | 42 X 22 X 38 Cm |
| Discharge Frequency | 100-1000 Hz | ||
| Highlight | Lab Grade spectrometry machine,Lightweight spectrometer machine,Lightweight spectrometer machine |
||
| Detecting the substrate | Iron based, copper based, aluminum based, nickel based, cobalt based, magnesium based, titanium based, zinc based, lead based, etc | |
|---|---|---|
| detection time | Depending on the type of sample, it usually takes around 25 seconds | |
| optical system | Pascal Runge Roland circular full spectrum optical system | |
| wavelength range | 140-680nm | |
| detector | High resolution multi CMOS image sensor | |
| electrode | Tungsten jet electrode | |
| analytical gap | Sample stage analysis gap: 3.5mm | |
| operation temperature | (10-35)℃ | |
| storage temperature | (0-45)℃ | |
| Working humidity | 20%-80% | |
| Purity requirements for argon gas | 100.00% | |
| Argon inlet pressure | 0.5MPa | |
| Argon gas flow site | Excitation flow rate of approximately 3.5L/min | |
| light source | New adjustable digital light source, high-energy pre combustion technology (HEPS) | |
| discharge frequency | 100-1000 Hz | |
| Discharge Current | Maximum 380A | |
| Excitation table aperture | 13mm | |
| vacuum system | not have | |
| Working power supply | 220V AC/50/60Hz protective grounded single-phase power supply | |
| Instrument dimensions | Host 420 × 220 × 380mm | |
| Instrument weight | 25kg |
- Advanced Optical System: Integrated CMOS detector technology captures complete spectral lines with a portable yet durable mechanical structure
- Intelligent Calibration: Automatically compensates for spectral drift caused by environmental temperature and pressure changes
- High-Performance Fiber: Special fiber technology maintains stability under demanding conditions where conventional quartz fibers degrade
- Field-Ready Design: Compact form factor with carrying case enables analysis anywhere without space limitations
| Detection Substrate | Iron, copper, aluminum, nickel, cobalt, magnesium, titanium, zinc, lead based alloys |
|---|---|
| Detection Time | Approximately 25 seconds (varies by sample type) |
| Optical System | Pascal Runge Roland circular full spectrum optical system |
| Wavelength Range | 140-680nm |
| Detector | High resolution multi CMOS image sensor |
| Electrode | Tungsten jet electrode |
| Analytical Gap | 3.5mm sample stage analysis gap |
| Operating Conditions | Temperature: 10-35°C | Humidity: 20-80% |
| Argon Requirements | 100.00% purity | 0.5MPa inlet pressure | ~3.5L/min excitation flow |
| Power System | 220V AC/50-60Hz grounded single-phase |
| Dimensions | 420 × 220 × 380mm (host) |
| Weight | 25kg |
The QR-8 incorporates a new adjustable digital light source with high-energy pre-combustion technology (HEPS), supporting discharge frequencies of 100-1000 Hz and currents up to 380A. The 13mm excitation table aperture accommodates diverse sample types while maintaining precision.
![]()
